Fibreglass Step By Step

£0.00

MILLENNIUM FIBERGLASS SYSTEM

Ideal for use on Natural Nails which may be weak or brittle.

A kind alternative for those who cannot wear Gels or Acrylics, Millennium Fibreglass offers an attractive and extremely strong alternative which can be worn for long.

FIBERGLASS APPLICATION INSTRUCTIONS

  1. Scrub and sterilise your own hands
  2. Sterilise and clean the Nail plate with Millennium Sanitising Solution
  3. Dehydrate the clients nail plate using Nail Prep
  4. Push and lift gently the cuticle skin
  5. Using a white block gently buff the surface of the nail plate
  6. Select a tip to fit side wall to side wall (see nail tip application)
  7. Apply stress strip (if applicable)
  8. Apply vertical strip (cut measure to length and width of the nail leave approx 1/6” around the cuticle area)
  9. Apply a drop of Resin in the centre of the Nail and spread with use of the extender nozzle over the entire nail
  10. Clean side wall and cuticle area with an orange wood stick if Resin runs into those areas
  11. Spray lightly with Activator
  12. Repeat step 10 and 11 once more, if a stronger nail is required a further layer of Resin can be applied
  13. File and buff the surface of the nail with a Millennium F180 grit file until any irregularities are removed and a smooth surface has been achieved
  14. Apply a cuticle oil and buff to a high gloss shine using a F300 Millennium Buffer

FIBERGLASS INFILLS

(approx 2 weeks alternating every two weeks using Mesh)

  1. Remove clients nail polish
  2. Scrub up
  3. Sterilise the clients hand with Millennium Sanitising Solution
  4. Dehydrate and sterilise the nail plate with Nail Prep
  5. Gently push back and lift cuticle skin
  6. Using the Millennium 180 grit file buff any product that has been lifted or is loose
  7. Wipe over the nail with Nail Prep to ensure No dust particles are left and apply a drop of Resin (make sure no resin runs into the cuticle area) only to the gaps between the  wrap and cuticle
  8. Lightly spray the activator and repeat steps 6,7,8 once again
  9. If required a further application of resin may be applied
  10. Buff the whole surface with a Millennium 240 grit file, or white sanding block until all irregularities are removed
  11. With the Millennium F300 three way buffer use black white and grey. Buff to a high gloss  shine and apply cuticle oil

Out of stock

Category:

Description

MILLENNIUM FIBERGLASS SYSTEM

Ideal for use on Natural Nails which may be weak or brittle.

A kind alternative for those who cannot wear Gels or Acrylics, Millennium Fibreglass offers an attractive and extremely strong alternative which can be worn for long.

FIBERGLASS APPLICATION INSTRUCTIONS

  1. Scrub and sterilise your own hands
  2. Sterilise and clean the Nail plate with Millennium Sanitising Solution
  3. Dehydrate the clients nail plate using Nail Prep
  4. Push and lift gently the cuticle skin
  5. Using a white block gently buff the surface of the nail plate
  6. Select a tip to fit side wall to side wall (see nail tip application)
  7. Apply stress strip (if applicable)
  8. Apply vertical strip (cut measure to length and width of the nail leave approx 1/6” around the cuticle area)
  9. Apply a drop of Resin in the centre of the Nail and spread with use of the extender nozzle over the entire nail
  10. Clean side wall and cuticle area with an orange wood stick if Resin runs into those areas
  11. Spray lightly with Activator
  12. Repeat step 10 and 11 once more, if a stronger nail is required a further layer of Resin can be applied
  13. File and buff the surface of the nail with a Millennium F180 grit file until any irregularities are removed and a smooth surface has been achieved
  14. Apply a cuticle oil and buff to a high gloss shine using a F300 Millennium Buffer

FIBERGLASS INFILLS

(approx 2 weeks alternating every two weeks using Mesh)

  1. Remove clients nail polish
  2. Scrub up
  3. Sterilise the clients hand with Millennium Sanitising Solution
  4. Dehydrate and sterilise the nail plate with Nail Prep
  5. Gently push back and lift cuticle skin
  6. Using the Millennium 180 grit file buff any product that has been lifted or is loose
  7. Wipe over the nail with Nail Prep to ensure No dust particles are left and apply a drop of Resin (make sure no resin runs into the cuticle area) only to the gaps between the  wrap and cuticle
  8. Lightly spray the activator and repeat steps 6,7,8 once again
  9. If required a further application of resin may be applied
  10. Buff the whole surface with a Millennium 240 grit file, or white sanding block until all irregularities are removed
  11. With the Millennium F300 three way buffer use black white and grey. Buff to a high gloss  shine and apply cuticle oil

Reviews

There are no reviews yet.

Be the first to review “Fibreglass Step By Step”

Your email address will not be published. Required fields are marked *